|
Therefore, AS has implanted a management quality system according to the UNE-EN ISO 9001:2000.
AS, as the manufacturer of catalysts identified with their trademark
and approved by the Ministry of Science and Technology, CERTIFIES
according to Regulation 1400/2002 of the European Commission, that
its catalysts are SPARE PARTS WITH QUALITY EQUIVALENT to that of
the original components.
The individual components of our products are of the highest quality,
from the ceramic substrata (also approved in accordance with the
strict American standards EPA and CARB with levels of efficiency
that are well above those required in these standards) to the stainless
steel used not only for the shells for casing the ceramic substrata,
but also for all the inlet and outlet pipes of our catalytic converters.
Our ceramic substrata are designed to enable the passage of the
greatest possible amount of gas flow, thus creating a minimum back-pressure
in the system, at the same time as it offers a maximum active gas
exposure surface area.
The method of impregnation of the layer to which the catalytic
elements are incorporated (combination of Platinum, Palladium and
Rhodium, depending on the applications required) and the composition
of the impregnation layer itself is what makes it possible to obtain,
under strict control of the specifications, the physicochemical
characteristics that give our products a exceptional quality in
terms of chemical durability.
All the above, together with the experience accumulated over the
years AS has been involved in the design and development of exhaust
systems, enables us to offer a guarantee for our products, without
any limitation in terms of kilometres given their exceptional quality
, although for obvious reasons there does exist a time constraint.
|
